AC Not Cooling
The system runs but the house is not reaching temperature or the air from the vents is not cold enough.
When your air conditioner stops cooling, starts blowing warm air or develops an electrical, airflow or mechanical problem, Coolmore Air & Heat can diagnose the system, explain what failed and get you a clear repair path.

You do not need to know which part failed before calling. Tell us what the system is doing and we’ll work through the diagnosis.
The system runs but the house is not reaching temperature or the air from the vents is not cold enough.
Warm supply air, weak airflow or certain rooms not cooling can point to several different system or duct-related problems.
Electrical components, safeties, controls, motors or other failures can prevent the system from starting normally.
Ice on the indoor coil or refrigerant lines is a symptom that should be diagnosed before the system is simply restarted.
Clogged condensate drains, float-switch trips, drain-pan issues and coil icing can all create water-related service calls.
Frequent starts and stops, buzzing, rattling or other changes in operation can be signs that the system needs attention.
Coolmore checks the system operation, narrows down the cause of the complaint and explains the repair before approved work is completed.

A no-cooling call can come from the thermostat, electrical components, indoor blower, outdoor condenser, refrigerant circuit, airflow, drainage or a combination of conditions. The goal is to identify the actual failure before recommending parts.
Real job photos help show the range of components and conditions that can be involved in an AC repair.





The exact repair depends on the diagnosis, equipment and failed component. These are common categories we encounter on service calls.
Failed electrical components can keep the compressor, condenser fan or other equipment from starting normally.
Blower and air-handler issues can reduce airflow, cause comfort problems or stop indoor air movement entirely.
Control, wiring and thermostat problems can prevent proper communication and system operation.
When pressures, temperatures or charge indicate a refrigerant-side issue, the cause should be diagnosed before adding refrigerant.
Indoor coil leaks, metering-device concerns and icing problems can require more involved diagnosis and repair.
Outdoor-unit repairs can range from electrical components and fan motors to major compressor-related work.
Condensate clogs and failed float safeties can shut the system down or create water around the indoor equipment.
Dirty equipment and airflow restrictions can contribute to poor performance and should be separated from actual component failures.
If the repair is major, Coolmore can explain when repairing still makes sense and when replacement deserves consideration.
Real Coolmore customer feedback selected for the website.
“They were very responsive, kept us informed throughout the entire process, and answered all of our questions promptly... Their pricing was reasonable, and their communication and customer service were excellent.”
Hobert“Excellent service from start to finish! Evan was fantastic in scheduling the appointment, and Bill, the technician, was professional, punctual, and took the time to explain everything clearly... Honest, knowledgeable, and reasonably priced.”
Amal“They replaced a failed float switch, cleaned and flushed the condensate drain line, treated the drain pan... They also performed a full system diagnostic and made sure everything was operating properly before they left.”
Mihir
Coolmore serves Oviedo, Winter Springs, Sanford, Lake Mary, Winter Park, Maitland, Longwood, Altamonte Springs, Casselberry, Orlando and surrounding Central Florida communities.
Common signs include warm air, weak airflow, a system that will not start, short cycling, unusual noises, water around the air handler, high indoor humidity, or rooms that are no longer cooling normally.
Yes. Coolmore diagnoses no-cooling and poor-cooling complaints by checking the indoor and outdoor equipment, electrical components, airflow, refrigerant performance and controls as needed.
Yes. If testing confirms a failed capacitor, contactor, wiring issue or other electrical component, Coolmore can explain the repair options and complete the approved work.
A frozen system can be related to airflow restrictions, blower issues, refrigerant problems or other operating conditions. The cause should be diagnosed before simply restarting the system.
Yes. Coolmore services indoor air handlers, blower assemblies, motors, controls and related components when a failure is confirmed.
That depends on the age and condition of the equipment, the failed component, repair cost, refrigerant type and overall system reliability. Coolmore can explain both options when replacement deserves consideration.
Yes. Coolmore provides residential and light commercial HVAC service throughout the Central Florida service area, with a separate Commercial HVAC page for larger commercial needs.
Coolmore serves Oviedo, Winter Springs, Sanford, Lake Mary, Winter Park, Maitland, Longwood, Altamonte Springs, Casselberry, Orlando and surrounding Central Florida communities.
Schedule service with Coolmore Air & Heat. We’ll diagnose the system, explain what we find and help you choose the right repair path.
