State Certified A/C Contractor CAC1813548Serving Builders, Contractors & Projects Across Central Florida
Home / New Construction HVAC
Builders • Contractors • Project HVAC

New Construction HVAC in Central Florida

Coolmore Air & Heat provides project-based HVAC support for builders, contractors, renovations and commercial construction—covering equipment installation, ductwork, rooftop package units, crane coordination and system startup based on the approved scope.

Request a Project Bid☎ Call (321) 387-2227
Contractor bid requestsEquipment & duct scopesRooftop / crane coordinationCentral Florida projects
Commercial rooftop HVAC unit being set by crane
Built for project work.A dedicated HVAC bid path for contractors, builders and construction-related scopes.
State CertifiedCAC1813548
Dedicated Bid FormProject details & deadlines
HVAC EquipmentInstallation & replacement
Ductwork SupportSupply, return & airflow
Startup & TestingVerify operation at completion
Construction HVAC Scope

One HVAC partner for the parts of the project that need to come together.

Every project is different, so Coolmore builds the bid around the actual plans, site conditions, equipment and requested scope instead of forcing a one-size-fits-all package.

Ground-Up & New Build HVAC

Project HVAC scopes for new buildings, additions and spaces being built from the ground up.

Renovations & Build-Outs

HVAC modifications, equipment changes and ductwork work tied to renovations or reconfigured spaces.

Commercial Project Work

Light-commercial equipment, rooftop package units, duct connections and project coordination.

Equipment Installation

Indoor and outdoor equipment installation based on the approved project scope and site requirements.

Ductwork & Airflow

New duct runs, modifications, supply and return connections, boots, grilles and airflow-related work when included in the project.

Replacement Projects

Larger equipment replacement and retrofit scopes that require planning, coordination and installation scheduling.

Have plans, a scope or a bid deadline?

Send Coolmore the project details through the contractor bid form so the request is separated from routine residential and commercial service calls.

Request a Bid
HVAC crew working on rooftop package equipment
HVAC ductwork installation and modification in an attic
Open commercial rooftop package HVAC unit during project work
What Can Be Included

Build the HVAC scope around the project—not around a generic service call.

Depending on the approved scope, Coolmore can coordinate the HVAC work needed to get equipment installed, connected, draining, communicating and operating correctly.

Equipment setting & installation
Ductwork connections & modifications
Condensate drainage
Low-voltage / controls work
Crane coordination where needed
Startup, testing & verification
Bid clarity matters: the final proposal should spell out exactly what Coolmore is responsible for and what remains with other trades.
The Coolmore Project Process

A cleaner path from bid request to completed HVAC scope.

The goal is to keep the HVAC portion organized so project expectations are clear before installation begins.

1

Send project details

Provide the address, plans or scope, project type, bid deadline and expected schedule.

2

Review the HVAC scope

We review equipment, ductwork, access, installation conditions and the work Coolmore is being asked to price.

3

Coordinate the work

Scheduling, equipment access, crane needs and trade coordination are handled around the approved scope.

4

Install & verify

Complete the HVAC work, perform startup/testing and verify operation before project closeout.

Real Coolmore Project Work

Crane sets, rooftop equipment and hands-on installation work.

These are real project photos from the kind of larger HVAC work Coolmore wants to grow with builders, contractors and commercial clients.

Commercial HVAC rooftop unit being lifted by crane

Rooftop Equipment Crane Set

Project planning can include equipment access and crane coordination when rooftop placement is required.

Lennox rooftop package HVAC unit being positioned by crane

Equipment Placement

Large equipment installation requires planning around access, placement and the surrounding project conditions.

Commercial rooftop package unit opened during HVAC project work

Startup & Final Equipment Work

Once equipment is in place, the project still needs controls, connections, startup and verification completed correctly.

Project Coordination

The small details can create the biggest schedule problems if they are missed.

Construction HVAC work is more than setting equipment. Access, drainage, duct transitions, controls and coordination with other trades can all affect the finished system.

▣

Equipment Access

Plan how the equipment gets into place before installation day, especially for rooftops or tight mechanical areas.

⇄

Duct Connections

Transitions, boots, grilles, flex and sheet-metal connections need to match the approved project layout.

⌁

Condensate Drainage

Drain routing and termination need to be considered as part of the installation—not after the equipment is already set.

⚡

Electrical Coordination

Equipment voltage, disconnect and circuit requirements should be coordinated with the electrical scope before startup.

◎

Controls & Low Voltage

Thermostat and control wiring must be completed and verified so the installed equipment can operate as intended.

✓

Startup & Verification

Final testing confirms the system operates before the HVAC scope is treated as complete.

Coolmore Service Standards

Communication matters even more when several trades share the same project.

Existing customer reviews highlight the responsiveness, communication and clear explanations Coolmore wants to carry into contractor and construction relationships.

★★★★★

“They were very responsive, kept us informed throughout the entire process, and answered all of our questions promptly... Their pricing was reasonable, and their communication and customer service were excellent.”

Hobert
★★★★★

“Excellent service from start to finish! Evan was fantastic in scheduling the appointment, and Bill, the technician, was professional, punctual, and took the time to explain everything clearly.”

Amal
★★★★★

“They also performed a full system diagnostic and made sure everything was operating properly before they left.”

Mihir
Coolmore Air & Heat Central Florida service area map
Project Service Area

Construction HVAC projects across Coolmore’s Central Florida footprint.

Coolmore’s project work is focused on the same core Central Florida area as the rest of the business, with Orlando remaining a prominent service area even though there is no dedicated Orlando city SEO page.

OviedoWinter SpringsSanfordLake MaryWinter ParkMaitlandAltamonte SpringsLongwoodCasselberryOrlando
New Construction HVAC FAQ

Questions builders and contractors may have before requesting a bid.

What information should I send for an HVAC project bid?

Send the project address, plans or scope if available, project type, bid deadline, expected schedule and any known equipment or duct requirements. Coolmore can review the information and identify what is needed to prepare the bid.

Can Coolmore coordinate crane work for rooftop HVAC equipment?

Crane access and equipment setting can be included in the project planning when the approved scope requires rooftop or elevated equipment placement.

Do you install ductwork for construction projects?

Ductwork, supply and return connections, boots, grilles and related airflow work can be included when they are part of the approved project scope.

Can you bid commercial construction and renovation work?

Yes. Coolmore has a dedicated Request a Bid path for contractors, builders, commercial renovations and other project-based HVAC work.

Does the project include startup and testing?

Startup, operational testing and performance verification can be included as part of the completed HVAC installation scope.

Do you serve Orlando construction projects?

Orlando remains within Coolmore’s broader Central Florida service area even though Coolmore is not currently building a dedicated Orlando city SEO page.

Related Services

Construction, commercial service and airflow work all connect.

Commercial HVAC

Commercial repair, maintenance and equipment replacement for operating businesses and managed properties.

Commercial HVAC →

Ductwork & Airflow

Detailed supply, return, flex and airflow work for existing properties and project modifications.

Ductwork Services →

AC Installation & Replacement

Residential and light-commercial equipment replacement outside of a larger construction bid.

AC Replacement →
Contractors & Builders

Have an HVAC project you want Coolmore to price?

Send the project address, scope, plans if available, bid deadline and schedule through the dedicated bid form. That gives us the information needed to review the project separately from routine service calls.

Request a Project Bid☎ Call (321) 387-2227
HVAC crew working on a rooftop project in Central Florida
Licensed & InsuredCAC1813548
Commercial RepairDiagnostics & corrective work
Preventative MaintenanceInspection & system care
Equipment ReplacementRooftop & split-system support
Central FloridaBusiness & property service
☎ CALL NOWREQUEST A BID